HOW TO FLASH ITEL ANDROID PHONES.

  1. ​Just like the MTK android devices, there are several android devices powered by SpreadTRUM of which iTel android devices are the commonest SpreadTRUM android device in ghana. As common with every gadgets, there are times when these devices would develop faults, either software or hardware.

Of course, you would need to service it. -that’s exactly why this tutorial is here.

WHAT IS FLASHING?

Flashing is the process of reverting your iTel android device to its factory defaults by means of flashing STOCK iTel firmware on it. Or, by means of flashing Custom ROM/Firmware on it.

Flashing is done to correct any software malfunctions experienced on any iTel android devices. Even those that seem persistence after performing a Factory-Reset would be corrected by flashing the iTel android device.

Unlike the MTK android devices, the procedures for flashing SpreadTRUM android devices is straight therefore, I would dive straight to the flashing exercise.

Now, shall we proceed?

1: DEFINITIONS OF TERMS USED

Before we begin the flashing exercise, let us do a bit of introduction by introducing ourselves to the terms to be identified while flashing iTel android.

 OS VERSION: this refers to the version of the firmware for which you have and that tyou are going to use to flash the iTel android device.

 MODEL VARIANTS: usually, there are different variant(s) of some iTel android devices as in the case of iTel 1351E and 1351.

HOW CAN YOU KNOW THE DIFFERENT VARIANTS OF iTel ANDROID DEVICE?

For iTel android device, it’s simple. By simply checking the label behind the battery seat on the phone or by navigating to Settings >> About >>  section of the phone, you can see detailed information about the phone right there.

 FIRMWARE : iTel firmware is usually compressed and packed in a compressed file known as .PAC. This file, when flashed on iTel android devices, contains all the images, GUI and the entire files necessary to run android OS on your iTel android device and other SpreadTRUM android devices parked in similar format.

 Flashing can upgrade or downgrade your iTel android device. It all depends on the versions of the firmware you used while flashing the phone. 

WHERE CAN YOU DOWNLOAD ITEL FIRMWARE?

You may download Firmware for most iTel android devices.

1:  Download the specific firmware for the iTEL android device from the link. http://www.firmwarelink.com/download-itel-firmware 3:  Open the SpreadTRUM Flash Tool you downloaded from the link above. It is compressed in a zip file, simply extract it onto a folder on your PC, open the folder to locate the SpreadTRUM Upgrade Tool application and then; double-click it to lunch the program.

NOTE:  Remember to install the SpreadTRUM Android Drivers following the normal Windows Drivers installation procedures.

4:  Switch off your iTel android device and then, connect it to your PC.

5:  Now, select the specific STOCK FIRMWARE you downloaded for your iTel android device by clicking on the Select Pack icon . 

6:  As soon as the file is loaded successfully, click on “Download Button” to commence the flashing operation.
NOTE: During the flashing operation, your phone may reboot once or twice. Just leave it and do not interrupt the operation.

7:  Once the flashing operation is successfully completed, you will see “Previous Passed” message displayed in green on the SpreadTRUM Flash Tool.

CONGRATULATIONS! You have now successfully flashed your iTel android device.

Do you have any questions? Make use of the comment box below.

Sharing is lovely, Feel free to share this post.

Advertisements

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s